Neat Little Led Effect Light

Great for use on decking and similar structures for demarcation of edges, steps and changes in level.

Also suitable for low level lighting in walls.

Housed inside is a LED lamp with a GU10 base that casts light left and right (or up and down) but by adjusting the optic inside one slot may be blacked out giving a single slot of light .

Comes with a burial pot for use in concrete and brickwork (which is often not required when used in decking).

Only a mains supply is required.

• Neat slots of subtle light
• No glare
• Easy to install - mains supply required
• 4000 degree k - cool white

Specification
Number Of Lamps	20
Lamp Type	LED Retrofit
Spare Lamps	GU10 1w LED Colour Retrofit Lamp
Lamps Included	Yes
Dimmable?	No
Total Wattage	1w
Width/Diameter	95mm
Height	125mm
Cut-Out Diameter	94mm
Construction	Stainless Steel
Wiring Details	Class 2 - Double Insulated - Requires no Earth Connection
IP Rating	IP67

Availability: A stock item - normally delivered in 3-5 days

Is this light fitting available in 'warm white' LEDs? This fitting uses a GU10 base LED lamp which may be changed for a different colour or a warm white LED lamp.

how bright is 1 watt, I have a 6metre dia patio and would like to use these lights around the edge, how many would I require? This LED light is for demarcation - it will not provide enough ambient light for use other than this. Look at our other buried lights, LED lights or low level wall lights for a suitable product. As a guide our kits of ten LEDs (medium and larger sizes) may be more suitable.

How is this fitted into decking? When fitting in to decking remove the burial pot, please note the screws will require securing with washers and nuts to fix firmly (these are not included, four per fitting required). The cut out required is 94mm maximum.

Does the fitting come with a length of flex attached? if so what is the length? how is the flex taken through the burial pot & what sort of seal has this?? I will be installing 22 of these into some stone steps, any information on the installation & conection detail will help. thank you Alec Frost This fitting is supplied with no cable. The connection is made underneath the fitting. The cable will then be secured by the gland/nut. When installing 22 ..Parallel arranging is possible (loop in and out)