Brushed Copper Wall Light - Up & Down

This up and down wall light in brushed copper has a lacquered finish so will not tarnish.

It is easy to re-lamp as the lamp is exposed when the top or bottom is unscrewed.

Made from solid extruded and engineered copper and made to last. It's also a lot cheaper than similar items offered by Hunza!

Supplied complete with 2 x 35w mains GU10 reflector lamps. Mounting plate: 100mm x 45mm.

• IP54 rated
• Supplied complete with lamps
• Brushed copper
• Clear lacquered protection

Specification
Number Of Lamps	2
Lamp Type	GU10 - Mains Halogen Reflector
Spare Lamps	GU10 Mains Halogen lamps - 10 Pack
Lamps Included	Yes
Max Wattage	35w
Total Wattage	70w
Width/Diameter	63mm
Height	180mm
Depth/Projection	115mm
Construction	Copper - Lacquered
Wiring Details	Class 1 - Requires an Earth Connection
IP Rating	IP54

Availability: A stock item - normally delivered in 3-5 days

The electrician has fitted the lamp, but did not keep instructions on how to change the lamps - unable to screw top or bottom open - how do you get the bulbs out? Both top and bottom cyclinders have a standard clockwise thread. Put on rubber gloves to help your grip and start with top cyclinder. Grasp at top and turn anticlockwise. If you electrician didn't use the oil supplied with the fitting it will be a little stiff but tapping with something blunt may help.

Is this product dimmable? Will it work with both a 250w switch or a 400w switch? This fitting uses mains voltage halogen reflector lamps (GU10) which are dimmable. Total wattage is 70W so you would be able to control 3 of these on a 250W dimmer module (210W total) or 5 on a 400W module (350W total) assuming nothing else is being operated by the same dimmer.

Can this unit be used with just the down light bulb installed? Err yes if that's what you wish. The lamp wiring is independent.

Can the lights be used internally too, specifically in a bathroom? These lights can be used internally, and having a high IP rating they are perfect for the bathroom.