The Light in Motion system addresses the requirements of contractors and architects for high quality, flexible, colour changing fluorescent lighting. It provides a means of obtaining blended colours from only 3 lamps. The system is designed specifically for colour changing requirements and exceptionally smooth transitions can be attained over a wide range of times. These transitions can be set up so that the lighting can fade smoothly to a colour on the push of a button.
Alternatively, the system has tremendous capabilities for very flexible automatic colour-changing output. An endlessly changing wash of colour is possible, providing a range of atmospheres for the environment in which it is installed, from a stimulating fast colour fading sequence through to a more relaxing, slow fade from one shade to another.
Each module is supplied with three 36w coloured fluorescent lamps. The housing keeps all the wiring neatly out of the way and encloses the high frequency flicker free control gear.
The master module is supplied with the 4 channel controller with LCD display. This may be surface mounted or flush mounted with the accessory panel supplied. An infrared remote control is available.
The master fitting can control up to 200 slave units.
The electrical consumption is 114 watts per module. Up to 30 units can be installed on a 16 ampere electric circuit.
4 light scenes can be pre-programmed and called up by a key stroke.
An easy to use RGB colour system that does not require prior knowledge of the system.
- Can control up to 200 slave units
- Easy to use
- Integrated signalconvertor 1-10v
- Complete with control panel
| Specification |
| Number Of Lamps |
3 |
| Lamp Type |
T8 Fluorescent |
| Lamps Included |
Yes |
| Max Wattage |
36w |
| Total Wattage |
108w |
| Width/Diameter |
190mm |
| Length |
1230mm |
| Depth/Projection |
90mm |
| Construction |
Mixed |
| Wiring Details |
Class 1 - Requires an Earth Connection |
Availability: Normally in stock - delivered in 5-7 days
