Another part of our Axlight range of lighting systems.
This model has four fully poseable MR16 heads (lamps not included) in a square arrangement.
Manufactured in aluminium this fitting is light and hard wearing.
The canopy and transformer (trailing edge dimmable) are both included.
- Transformer and canopy included
- Available as low or mains voltage
- Fully poseable heads
- Dimmable
| Specification |
| Number Of Lamps |
4 |
| Lamp Type |
MR16 - 12v Halogen Reflector |
| Spare Lamps |
MR16 Lamp 12v lamp - 50w
|
| Lamps Included |
No |
| Dimmable? |
Only on good quality trailing edge dimmers  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Total Wattage |
200w |
| Width/Diameter |
240mm |
| Length |
350mm |
| Height |
30mm |
| Suspension |
2500mm |
| Adjustable Height |
Yes – at time of installation |
| Construction |
Aluminium - Anodised |
| Wiring Details |
Class 1 - Requires an Earth Connection |
Availability: Normally in stock - delivered in 5-7 days
.jpg "Click to enlarge")
