A four lamp twin lamp type profile lighting system using mains voltage lamps.
Outer modules each contain a 100W R7S linear halogen lamp, with the inner gimbled modules containing a 75W ES111 halogen reflector lamp.
Canopy is included.
Lamps required (not included) are: 2 * 200W Max 118mm R7S 2 * 75W Max ES111
- Also available in an AR111/Discharge lamp variant
- Adjustable lamp heads
- Canopy included
- Aluminium construction
| Specification |
| Number Of Lamps |
4 |
| Spare Lamps |
ES111 lamp 24 degree flood
R7s Linear EcoSaver Halogen
R7S Standard Mains Linear Halogen Lamp
|
| Lamps Included |
No |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Total Wattage |
550w |
| Width/Diameter |
190mm |
| Length |
1178mm |
| Height |
120mm |
| Suspension |
2500mm |
| Adjustable Height |
Yes – at time of installation |
| Construction |
Aluminium - Anodised |
| Wiring Details |
Class 1 - Requires an Earth Connection |
Availability: Normally in stock - delivered in 5-7 days
