Another part of our Axlight range of lighting systems.
The big brother to the Axlight GU10, this model has four fully poseable ES111 heads (lamps not included) in a linear arrangement.
Manufactured in aluminium this fitting is light and hard wearing.
The canopy is included.
- Canopy included
- Available as low or mains voltage
- Fully poseable heads
- Dimmable
| Specification |
| Number Of Lamps |
4 |
| Lamp Type |
ES111 - 240V Halogen |
| Spare Lamps |
ES111 lamp 24 degree flood
|
| Lamps Included |
No |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
75w |
| Total Wattage |
300w |
| Width/Diameter |
190mm |
| Length |
780mm |
| Height |
100mm |
| Suspension |
2500mm |
| Adjustable Height |
Yes – at time of installation |
| Construction |
Aluminium - Anodised |
| Wiring Details |
Class 1 - Requires an Earth Connection |
Availability: Normally in stock - delivered in 5-7 days
.jpg)
