A high quality solid German engineered buried exterior uplight for GU10 mains halogen reflector lamps.
Manufactured with a grade 304 stainless steel cover.
Available for 35W maximum lamps.
Dimensions differ slightly for round and square versions.
Round - Ø/H: 135/115mm
Square - L/W/H: 135/135/115mm.
Mounting pot is included.
Requires a 120mm deep burial hole.
- Two shapes available
- 5 tonne loading limit
- Through-wiring possible
- Mounting pot included
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
GU10 - Mains Halogen Reflector |
| Spare Lamps |
GU10 Mains Halogen lamps - 10 Pack
|
| Lamps Included |
No |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
35w |
| Cut-Out Diameter |
120mm |
| Construction |
Cast Aluminium |
| Wiring Details |
Class 1 - Requires an Earth Connection |
| IP Rating |
IP67 |
Availability: Normally in stock - delivered in 5-7 days
.jpg "Click to enlarge")
.jpg "Buried Exterior Uplighter for MR16 Lamps- Saving you £19.48")
