A wall or ceiling mounted single spotlight with clear glass finish and satin nickel detailing.
Takes 1 x 50w GU10 lamp, supplied.
IP20 rated, suitable for bathroom zone 3.
- IP20 suitable for zone 3
- Glass and satin nickel finish
- Three plate version also available
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
GU10 - Mains Halogen Reflector |
| Spare Lamps |
GU10 Mains Halogen lamps - 10 Pack
|
| Lamps Included |
Yes |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Width/Diameter |
100mm |
| Depth/Projection |
150mm |
| Construction |
Glass & Satin Nickel |
| Wiring Details |
Class 1 - Requires an Earth Connection |
| IP Rating |
IP20 |
Availability: Normally in stock - delivered in 5-7 days
