Stylish flexible surface mounted spot finished in brushed chrome.
Uses a mains dimmable GU10 halogen reflector lamp with GU10 base (max 50w) Rear of lamp is open.
Light from the rear creates an interesting pattern on the ceiling.
Suitable for ceilings and walls. 90º tilt 350º rotation
- Steel braided flex
- Full tilt and rotate
- Uses GU10 mains lamps
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
GU10 - Mains Halogen Reflector |
| Spare Lamps |
GU10 Mains Halogen lamps - 10 Pack
|
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Width/Diameter |
60mm |
| Height |
165mm |
| Wiring Details |
Class 1 - Requires an Earth Connection |
Availability: Normally delivered in 7-10 days
.jpg "Click to enlarge")
