A square tilt downlight available in several finishes.
Can be pushed back to ceiling level or pulled out up to 85° making this ideal for artwork or displays.
Available in satin silver, polished chrome or white
Supplied as fitting or as a money saving kit complete with transformer and 12v Philips lamp in 36 degree or 60 degree beam angles.
This fitting does not accommodate a mains GU10 lamp.
Ceiling cut-out 95 x 85mm
- Available in several finishes
- Dedicated 12v lamp holder
- Gives 85° tilt ideal for artwork
- Save money with an installer kit
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
MR16 - 12v Halogen Reflector |
| Spare Lamps |
MR16 Lamp 12v lamp - 50w
|
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Width/Diameter |
100mm |
| Depth/Projection |
65mm |
| Suggested Void Depth |
125mm |
| Construction |
Cast Aluminium - Painted |
| Wiring Details |
Class 3 - Supplied from an SELV Transformer |
Availability: A stock item - normally delivered in 3-5 days
.jpg "Click to enlarge")
.jpg "60va 12v Transformer Auto Reset- Saving you £1.20")