A round downlight that tilts and turns for use in highlighting artwork, washing walls or general spotlighting in domestic retail and commercial environments.
Accommodates acoustic ceiling tile and plasterboard up to 30mm thick.
Can only be used with a Gx5.3 MR16 12v reflector lamp (50mm dichroic) - there is insufficient room for a GU10 lamp and lampholder. Cutout: 105mm Void depth: 95mm
Our money saving kits are now supplied with Philips Lamps in a choice of 36º or 60º beam angles.
- Full rotation with 90º tilt - ideal for artwork
- Dedicated 12v lamp holder
- Supplied individually or as installer kit
- Save money with an installer kit
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
MR16 - 12v Halogen Reflector |
| Spare Lamps |
MR16 Lamp 12v lamp - 50w
|
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Width/Diameter |
130mm |
| Suggested Void Depth |
125mm |
| Cut-Out Diameter |
105mm |
| Construction |
Cast Aluminium - Painted |
| Wiring Details |
Class 3 - Supplied from an SELV Transformer |
| IP Rating |
IP21 |
Availability: Normally in stock - delivered in 5-7 days
(1).jpg "Click to enlarge")
(1).jpg "Click to enlarge")
