A nice designed scoop downlight that comes down in a swan neck fashion form the ceiling plate. Also looks perfectly acceptable when moved into downlight mode.
Available in the satin brushed nickel finish. ( Sadly the white finish has been discontinued by the supplier )
Will only accept 12v MR16 lamps - GU10 mains lamps are too long.
- 355º rotation and 90º adjustment
- Can be used as a flat downlight if desired
- Die cast alloy construction to dissipate heat build up
- Requires transformer and lamp
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
MR16 - 12v Halogen Reflector |
| Spare Lamps |
MR16 20w 12v lamp - 36 degree flood MR16 35w 12v lamp - 36 degree flood MR16 Lamp 12v lamp - 50w MR16 Philips Perfect Fit LEDspot 12v Lamp (Energy Saving)
|
| Lamps Included |
No |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Width/Diameter |
124mm |
| Suggested Void Depth |
120mm |
| Cut-Out Diameter |
110mm |
| Construction |
Die Cast Aluminium and Steel |
| Wiring Details |
Class 3 - Supplied from an SELV Transformer |
| IP Rating |
IP20 |
Availability: A stock item - normally delivered in 3-5 days