Tilt mains voltage downlight kit comprising die cast twist lock downlight, GU10 double insulated porcelain lampholder and Philips GU10 PAR (polished aluminium reflector) lamp.
Firm Twistlock front lamp retaining ring for ease of installation and lamp replacement.
No fiddly lamp holding springs - relamp in situ.
Manufactured from high grade cast aluminium - high temperature stability. High quality powder coated paint finish.
Complete with Easy wire, fully enclosed terminal housing with quick release captive securing screw and self locking cable clamp.
Strong rat trip clips for easy installation and secure fixin.
Cut out: 80mm Void depth: 95mm
- 30⁰ Tilt downlight kit
- Complete with 40º degree 50w lamp
- Complete with GU10 Lampholder
- Easy lamp change
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
GU10 - Mains Halogen Reflector |
| Spare Lamps |
GU10 Mains Halogen lamps - 10 Pack
|
| Lamps Included |
Yes |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Width/Diameter |
95mm |
| Construction |
Cast Aluminium - Painted |
| Wiring Details |
Class 1 - Requires an Earth Connection |
| IP Rating |
IP21 |
Availability: A stock item - normally delivered in 3-5 days