Twist Lock Tilt Diecast 230v Kit - Satin Silver

Tilt mains voltage downlight kit comprising die cast twist lock downlight, GU10 double insulated porcelain lampholder and Philips GU10 PAR (polished aluminium reflector) lamp.

Firm Twistlock front lamp retaining ring for ease of installation and lamp replacement.

No fiddly lamp holding springs - re-lamp in situ.

Manufactured from high grade cast aluminium - high temperature stability. High quality satin silver finish.

Complete with easy wire, fully enclosed terminal housing with quick release captive securing screw and self locking cable clamp.

Strong rat trip clips for easy installation and secure fixing.

Cut out: 80mm Void depth: 95mm

• 30⁰ Tilt downlight kit
• Complete with 40º Philips 50w lamp
• Complete with GU10 Lampholder
• Easy lamp change

Specification
Number Of Lamps	1
Lamp Type	GU10 - Mains Halogen Reflector
Spare Lamps	GU10 Mains Halogen lamps - 10 Pack
Lamps Included	Yes
Max Wattage	50w
Width/Diameter	95mm
Construction	Cast Aluminium - Satin Silver
Wiring Details	Class 1 - Requires an Earth Connection
IP Rating	IP21

Availability: A stock item - normally delivered in 3-5 days

These Twist Lock Tilt Diecast 230V - Satin Silver Lights are far superior to lights I have previously fitted. The quality, spring strength and quarter turn bulb retaining mechanism really are first class. I would recommend most highly. W Platt Wilf , 10 March 2010 08:40:45

Can you use a 20w bulb with these? Yes any wattage GU10 lamp can be used up to a maximum of 50 watts.

Hello, Are these fire rated? Thanks This particular downlight is not fire rated although there is a fire rated version on the webiste. Use the reference number SAMDLF302 to find what your looking for.

Hello, I only have a cavity space of 100mm, can you confirm that these will fir safely in the space? How do they fix without spring clips? The advised void depth is 95mm, thus you should have sufficient space for them. The traditional design using lamp fixing clips has been replaced with a twist lock action, however the downlight fitting itself is still fitted with spring clips to secure into place in the usual way.