Tilt and rotate adjustable mains voltage downlight kit comprising die cast tilt and rotate adjustable downlight, GU10 double insulated porcelain lampholder and Philips GU10 PAR (polished aluminium reflector) lamp.
Unrestricted rotation and tilt to 30º.
No fiddly lamp holding springs - relamp in situ.
Manufactured from high grade cast aluminium - high temperature stability. High quality chrome finish.
We'd suggest a hole of no more than 90mm to ensure a snug fit and use a padsaw to enlarge this slightly if required.
Bezel size 102mm Suggested minimum void depth 100mm Not suitable for CFL GU10 lamps.
- Tilt and rotate adjustable downlight kit
- Full rotate and 30º tilt
- Complete with 40º Philips 50w lamp
- Complete with GU10 Lampholder
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
GU10 - Mains Halogen Reflector |
| Spare Lamps |
GU10 Mains Halogen lamps - 10 Pack
|
| Lamps Included |
Yes |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Width/Diameter |
102mm |
| Construction |
Cast Aluminium - Polished Chrome |
| Wiring Details |
Class 2 - Double Insulated - Requires no Earth Connection |
| IP Rating |
IP21 |
Availability: A stock item - normally delivered in 3-5 days