A die cast aluminium downlight. Open fronted downlight in anodised aluminium.
The lamp is close to bottom of the fitting so will appeal more those who like a little sparkle to their lighting.
Recessed depth: 95mm (4') Cut out: 67mm
Takes 1 x dichroic lamp MR16 max 50w Requires transformer.
The lamp is great quality product and a very good price.
- Die cast aluminium - Neat brushed and hard anodised finish
- Also available as low voltage
- Fixed downlight
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
GU10 - Mains Halogen Reflector |
| Spare Lamps |
GU10 Mains Halogen lamps - 10 Pack
|
| Lamps Included |
No |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Width/Diameter |
80mm |
| Construction |
Cast Aluminium |
| Wiring Details |
Class 1 - Requires an Earth Connection |
Availability: Normally in stock - delivered in 5-7 days
.jpg "Click to enlarge")
.jpg)
