A fixed aluminium low voltage downlight with a white finish. The lamp housing is set back within the fitting, a black baffle with concentric rings is incorporated to reduce direct glare.
Designed for use with a 12V low voltage 50w halogen MR16 lamp (excluded).
Cut out Ø:95mm/ Overall Ø: 105mm/ Recess depth: 115mm
Requires a transformer (excluded)
- Black baffle with concentric rings reduces direct glare
- Fixed
- Low Voltage
- Aluminium in a white finish
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
MR16 - 12v Halogen Reflector |
| Spare Lamps |
MR16 Lamp 12v lamp - 50w
|
| Lamps Included |
No |
| Dimmable? |
On good quality leading edge or trailing edge dimmers  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Width/Diameter |
105mm |
| Depth/Projection |
115mm |
| Cut-Out Diameter |
95mm |
| Construction |
Cast Aluminium |
| Wiring Details |
Class 3 - Supplied from an SELV Transformer |
Availability: Generally 7-10 days or faster
.jpg "Click to enlarge")
.jpg "60va 12v Transformer Auto Reset- Saving you £1.20")
.jpg "MR16 Lamp 12v lamp - 50w")