This downlight has a 59mm diameter bezel and is suited to the smaller MR11 lamps.
Supplied with extended spring fixing posts which allows installation in double thickness plasterboard.
Requires 1 x dichroic lamp MR11 max 35w, Requires transformer.
- 35W maximum
- Discreet size
- Available in 5 different finishes
- Requires a transformer and lamp
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
MR11 - 12v Halogen Reflector |
| Spare Lamps |
MR11 12v Halogen Dichroic Lamp
|
| Lamps Included |
No |
| Dimmable? |
On good quality leading edge or trailing edge dimmers  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
35w |
| Width/Diameter |
59mm |
| Height |
110mm |
| Cut-Out Diameter |
52mm |
| Construction |
Cast Aluminium |
| Wiring Details |
Class 3 - Supplied from an SELV Transformer |
| IP Rating |
IP20 |
Availability: Normally in stock - delivered in 5-7 days
.jpg "Click to enlarge")
.jpg "60va 12v Transformer Auto Reset- Saving you £1.20")
