This is a pressed steel downlight 12V (low voltage), adjustable round low profile halogen downlight. It has a round low profile appearance so is suitable for use where unobtrusive downlights are required.
The recessed lamp housing is adjustable by 12 degrees.
The white finish can be painted to blend in with existing colours (good quality emulsion paint is recommended).
This downlight takes a maximum 50W MR16 lamp (excluded).
Part of a range - available in circular and square options.
Transformer will be required for this fitting (excluded)- please see below for details.
- Available in two finishes - Satin Nickel or White
- White finish can be painted
- Recessd lamp adjustable by 12 degrees.
- Low Voltage
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
MR16 - 12v Halogen Reflector |
| Spare Lamps |
MR16 Lamp 12v lamp - 50w
|
| Lamps Included |
No |
| Dimmable? |
On good quality leading edge or trailing edge dimmers  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Total Wattage |
50w |
| Width/Diameter |
86mm |
| Height |
130mm |
| Cut-Out Diameter |
72mm |
| Construction |
Pressed Steel |
| Wiring Details |
Class 3 - Supplied from an SELV Transformer |
Availability: A stock item - normally delivered in 3-5 days