Two piece adjustable low voltage downlight available in several different finishes.
The ceiling housing fits single or double skinned plasterboard and acoustic tile ceilings with sprung steel bands.
The front bezel removes for re-lamping and rotation or adjustment.
Can be used with a mains GU10 lamp simply buy a SAMLHGU10 mains lamp holder.
White and Satin Silver versions of this product are out of stock until June 2012
Our money saving kits are now supplied with Philips Lamps in a choice of 36º or 60º beam angles.
- Adjustable downlight for 12v lamps
- Full rotation and 40 degree tilt
- Supplied individually or as installer kit
- Save money with an installer kit
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
MR16 - 12v Halogen Reflector |
| Spare Lamps |
MR16 Lamp 12v lamp - 50w
|
| Lamps Included |
No |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Width/Diameter |
102mm |
| Depth/Projection |
6mm |
| Suggested Void Depth |
100mm |
| Cut-Out Diameter |
90mm |
| Construction |
Steel with Satin Silver Finish |
| Wiring Details |
Class 3 - Supplied from an SELV Transformer |
Availability: A stock item - normally delivered in 3-5 days