Small adjustable downlight in machined aluminum with anodised finish. The 35mm lamp on this fitting is further back to reduce glare. Adjustable +/- 25 degrees. Centre unscrews to change lamp. Recessed depth: 95mm (4') Cut out: 58mm
Requires MR11 dichroic lamp and 12v supply via transformer.
- Neat downlight with anodised finish
- Adjustable to 25 degrees
- Centre ring unscrews to change lamp
- Save money with an installer kit
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
MR11 - 12v Halogen Reflector |
| Spare Lamps |
MR11 12v Halogen Dichroic Lamp
|
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
35w |
| Width/Diameter |
67mm |
| Depth/Projection |
7mm |
| Cut-Out Diameter |
58mm |
| Construction |
Aluminium - Anodised |
| Wiring Details |
Class 3 - Supplied from an SELV Transformer |
| IP Rating |
IP20 |
Availability: A stock item - normally delivered in 3-5 days
.jpg "Shower Downlight - Piston")
.jpg "60va 12v Transformer Auto Reset- Saving you £1.20")
