Part of a range, one of the most technically advanced products of its class. Tilt and directional lighting.
Please note this fitting is available in aluminum only.
Requires transformer and lamp, both of which can be purchased in the accessories part of the website.
Cut out 185mm x 185mm.
- Internally adjustable
- Innovative design
- Easy installation and lamp change
- Aluminium finish only
| Specification |
| Number Of Lamps |
4 |
| Lamp Type |
MR16 - 12v Halogen Reflector |
| Spare Lamps |
MR16 Lamp 12v lamp - 50w
|
| Lamps Included |
No |
| Dimmable? |
On good quality leading edge or trailing edge dimmers  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Total Wattage |
200w |
| Width/Diameter |
125mm |
| Height |
350mm |
| Depth/Projection |
350mm |
| Construction |
Cast Aluminium |
| Wiring Details |
Class 3 - Supplied from an SELV Transformer |
Availability: A stock item - normally delivered in 3-5 days
.jpg "Click to enlarge")
.jpg "2 Light Mini Box- Saving you £11.13")
.jpg "Convert 12v Fittings to Mains Voltage- Saving you £0.40")
