90 Min Tilt Fire Rated Downlight - Satin Silver

A fire rated downlight comprising of a steel body with die cast aluminium head fully tested for 90 minute fire rated surfaces, and integrated intumescent material which seals the downlight and cut-out in the event of a fire.

In compliance with the Building Regulations Approved Document B with regards to Fire Safety and Document E with regards to Resistance to the Passage of Sound.

Installed as easily as a standard non fire rated downlight in ceiling materials up to 35mm thick.

This is an adjustable or 'tilt' downlight giving 15º ± pitch. Further adjustment is not available because the lamp would hit the inside of the steel fire housing.

This fitting is offered in 12v (MR16) and mains (GU10) versions - all are supplied with Osram lamps.

The 12v version is Class 3 and requires a transformer.

The mains version is Class 2 (double insulated)

• Fully tested for 90 minute fire rated surfaces
• Steel body and aluminium head
• Integrated intumescent material
• Complies with Approved Documents B & E

Specification
Number Of Lamps	1
Spare Lamps	GU10 Mains Halogen lamps - 10 Pack MR16 Lamp 12v lamp - 50w
Lamps Included	Yes
Dimmable?	Yes on standard dimmer Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating.
Max Wattage	50w
Width/Diameter	100mm
Height	115mm
Suggested Void Depth	130mm
Cut-Out Diameter	82mm
Construction	Die Cast Aluminium and Steel
IP Rating	IP20

Availability: A stock item - normally delivered in 3-5 days

I notice that this 12v version needs a transformer. Is the transformer included or does it need to be purchased separately? The transformer needs to be bought separately. You will find it at the bottom of the listing.