This Brenda rise and fall pendant is ideal to install above a dining room table or breakfast bar area. The light fitting can be pulled down or pushed up allowing you ambient lighting when required or kept out of the way when not needed.
White metal with chrome detailing and easy to wipe clean if used in a kitchen.
1500mm when fully extended.
Minimum Drop is 560mm.
Requires 1 x 100w E27 lamp, not supplied.
- Part of a range of similar products
- Rise & fall mechanism
- Glossy metal finish
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
E27 (ES) Mains Lamp |
| Spare Lamps |
GLS Energy Saving Halogen Lamp (Energy Saving)
|
| Lamps Included |
No |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
100w |
| Width/Diameter |
430mm |
| Suspension |
1500mm |
| Adjustable Height |
Yes – while in situ |
| Construction |
Metal & Satin Nickel |
Availability: Generally 7-10 days or faster
.jpg "Click to enlarge")
