Simple yet high in quality and design metal pendant.
Available in either white or black, the black one is finished in rubber paint, so the finish is slightly different from the white on.
Frosted acrylic plate sits on top of the white fitting, and on the black one the plate is smoked acrylic.
Each pendant has its own colour matched cord.
Height of the fitting can be adjusted at time of installation.
Takes a E27 100w lamp which is not supplied.
Perfect for hallways, and breakfast bars.
- Danish design
- Available in black or white
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
E27 (ES) Mains Lamp |
| Spare Lamps |
E27 GLS Clear Lamp - 10 Pack
|
| Lamps Included |
No |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
100w |
| Total Wattage |
100w |
| Width/Diameter |
450mm |
| Height |
360mm |
Availability: Please call for availability
.jpg "Click to enlarge")
.jpg)
