This Santana Satin Steel fitting is constructed from satin steel with acid glass shades.
High quality design - although this fitting is relatively simple with its design, its still well made and you can tell a lot of thought has gone into the design.
Being semi flush this fitting is ideal for lower ceilings as the height is only 390mm.
Would look perfect in many rooms across the home - including, living areas, Hall ways or landings.
Part of a range - 5 light and wall light are also available - Look good singularly on their own or better complimented together.
Fitting takes 3 x E14 60w lamp - which are not supplied.
- Single and double wall lights also available
- 5 light pendant available
- Ideal for lower ceilings
- Semi flush - Ideal for low ceilings
| Specification |
| Number Of Lamps |
3 |
| Lamp Type |
E14 (SES) Mains Lamp |
| Spare Lamps |
Candle Lamp 35mm diameter
|
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
60w |
| Total Wattage |
180w |
| Width/Diameter |
480mm |
| Height |
390mm |
| Construction |
Steel with Satin Silver Finish |
Availability: Normally delivered in 7-10 days