Italian made flush fitted pendant. The outer skin is steel which is laser cut in the shape of a crystal and powder coated matt black.
Inside the cylinder is a sheet of optical lighting film produced by 3M which refracts, stretches and splits the light into colours of the spectrum.
In the centre is a frosted glass cylinder which hold the Edison screw lamp. Around this cylinder you can fit one of the three supplied glass colour filters (red, amber and green).
The pendant is held in position by french curve a laser cut from steel and powder coated silver grey.
This is a robust and really interesting flush fitting suitable for bedrooms and lower ceiling areas.
- Laser Cut Steel
- Great lighting effect - 3 colour filters supplied
- Takes halogen E27 lamps max 250w
- Fabulous for bedrooms
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
E27 Halogen |
| Lamps Included |
Yes |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
250w |
| Total Wattage |
250w |
| Width/Diameter |
450mm |
| Height |
330mm |
| Construction |
Steel - Powder Coated |
| Wiring Details |
Class 1 - Requires an Earth Connection |
Availability: Typically two weeks although we often have stock