This Scala fitting is ideal for large areas such as stairwells or atriums. The swirling array of crystal balls and detailing add a sense of glitz and glamour to the fitting.
Supplied with 3 x 50w GU10 lamps which are housed in the ceiling plate.
- Ideal for large atriums or stairwells
- Crystal and chrome
- Wires which can be shortened at installation
- Comes complete with lamps
| Specification |
| Number Of Lamps |
3 |
| Lamp Type |
GU10 - Mains Halogen Reflector |
| Spare Lamps |
GU10 Mains Halogen lamps - 10 Pack
|
| Lamps Included |
Yes |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Total Wattage |
150w |
| Width/Diameter |
320mm |
| Suspension |
1230mm |
| Adjustable Height |
Yes – at time of installation |
| Construction |
Chrome & Crystal |
| Wiring Details |
Class 1 - Requires an Earth Connection |
Availability: Normally delivered in 7-14 days