xxxEnergy Saving Recessed Downlight

Small energy saving recessed LED downlight avaliable with two different coloured lamps - blue or white. Please make your selection below.

Perfect for stairs and plinths as the fiting is recessed into the walls and will make a good marker or a guide.

Light weight so also perfect for cabinets.

IP20 rated.

Comes with pre-fitted plug and play socket connector.

REQUIRES:- LED 6 way junction box, LED jump leads and LED driver - please see related accessories below.

• 1W superbright LED
• Recessed in ceiling or the wall
• IP20 Rating
• Pre-fitted with plug and play socket connector

Specification
Number Of Lamps	1
Lamp Type	Long Life LED light source
Lamps Included	Yes
Width/Diameter	47mm
Height	23mm
Depth/Projection	48mm
Construction	Aluminium - Anodised

Availability: A discontinued line: limited stocks available

I was wondering how much light comes of the Energy saving recessed downlights, would like to put them in a two story house. One of the issues with energy saving lighting is knowing how much light you will obtain from a single lamp. New guidelines for use in domestic and commercial building will make this easier as it defines a guide for Part L compliant lighting as fittings with a luminous efficiency greater than 45 lamp lumens per circuit watt and a total output greater than 400 lumens. This would typically mean that most, if not all, CFL lamps on the market are not compliant and that a lot of LED lamps while very high in efficiency, fall short of the required light output per lamp (including this light fitting) It is a minefield built on shifting sands and the consumer has no chance of getting it right without assistance - call us and we'll run through the options for the best solution to suit your budget.

I have bought 6 plinth lights (Energy Saving Recessed Downlight) with 2 Ultra Compact 350mA LED Driver 1-3w and a 6 way junction box. Can I attach all 6 lights via one junction box and what type of cable do I need between drivers/jcn. box and lights? All six fittings can be run through the one junction box. However you can only have one driver coming out of the junction box so you have 2 options. First option is to return your 2 drivers and purchase this driver here Second option is to buy another junction box and put 3 fittings on each junction box and use the drivers you already have. However be aware if you do choose the second option you will require 6 quantity of the LED Jump Lead as they are needed to complete the circuit

Thinking of specifying these LED spot lights for a small single storey flat roof extension. The roof is full of insulation. I've just read your section on fire hoods. Are these lights suitable? What cut out / ventilation area is needed within the insulation? Are these suitable for W/C areas (no shower or bath) We have listed a new product that would be perfect for you. Type in 'SAMZANT' into the search box to view. we recommend that you have these spaced at 1.2 metre centres.