The Glo-Ball range is pure style and elegance at its best. This is the middle size of three suspended pendants in the range.
Originally designed by Jasper Morrison in 1998 this range of minimal yet sophisticated light fixtures has been built upon to offer glamour for any environment. The Glo-ball range is available as pendants, table lamp and floor lamp.
The diffuser consists of an externally acid-etched, hand blown, flashed opaline glass, high temperature lampholder and gloss white painted pressed steel diffuser support.
Connected to a white ceiling rose is 3.7 metres of clear flex and a single high-tensile braided stainless steel cable, both of which can be shortened at time of installation to suit your needs.
IP20 Rated - Offering protection against fingers or other objects not greater than 80mm in length.
Thermally tested and passed for use with 150w E27 halogen lamps, however you are encouraged to use eco halogen lamps to save energy.
- Part of a complete range - table, floor wall and ceiling
- Opal flashed glass - provides soft diffused light
- Dimmable when used with tungsten or halogen lamps
- 3.7 metre suspension - adjustable at time of installation to suit lower ceilings
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
E27 Halogen |
| Spare Lamps |
E27 (ES) Philips Compact Fluorescent Lamp E27 Tubular Halogen lamp GLS Energy Saving Halogen Lamp (Energy Saving)
|
| Lamps Included |
Yes |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
150w |
| Total Wattage |
150w |
| Width/Diameter |
330mm |
| Depth/Projection |
270mm |
| Suspension |
3700mm |
| Adjustable Height |
Yes – at time of installation |
| Construction |
Glass & Powder Coated Steel |
| Wiring Details |
Class 2 - Double Insulated - Requires no Earth Connection |
| IP Rating |
IP20 |
| PDF Document |
Click to open |
Availability: Normally delivered in 7-14 days