Round Chunky Glass IP65 Rated

3 Options: 12v, mains or fire rated

Ref: MIKMINT

From: £42.25 inc VAT

Click to enlarge...

Questions & Answers

Reviews

Description

A classy real quality bathroom shower downlight. IP65 splash and spray proof with twin gaskets - suited to all zones in bathrooms, wetrooms and showers.

Moulded clear glass and polished chrome details. 240v mains version for GU10 reflector lamp.

12v SELV version for MR16 GX5.3 (requires transformer - see items below)

240v version is double insulated (no earth required) 12v version class III

Really heavy construction - excellent quality
Design for use in all bathroom zones
Easy to relamp with out mess or tools
12v SELV version ideal for wet spaces

Specification
Number Of Lamps	1
Spare Lamps	GU10 Mains Halogen lamps - 10 Pack MR16 Lamp 12v lamp - 50w
Lamps Included	No
Dimmable?	Yes on standard dimmer Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating.
Max Wattage	50w
Width/Diameter	100mm
Depth/Projection	25mm
Cut-Out Diameter	70mm
Construction	Polished Chrome and Glass
IP Rating	IP65
PDF Document	Click to open

Availability: Normally delivered in 5-7 days

Does this product require a cut out? I do not have suspended ceiling, but require zone 1 light.
It is not often that our customers need zone 1 bathroom lighting. Unless the ceiling height above your shower or bath is less than 2250mm from the floor. That said this fitting is designed to be recessed into the ceiling void which would require a hole 70mm in diameter. If you have a solid ceiling i.e. concrete, you will require a surface mounted fitting. Please contact us so we can establish your needs further.

i need surface mounted IP65 for wet room with concrete ceiling with 1/2" batton and aqua board fitted hence no room for recessed lighting. Would this light be suitable?
This fitting still has a fully recessed lamp and so will not be suitable for your purposes.

We only have a 70mm deep void behind our ceiling, but want a Zone 1 light in the shower - can you suggest anything?
Thanks
With a MR16 lamp being 45mm high without electrical connection this is a challenge. You can only use a low heat light source in such a small space or the ceiling void and fitting will get too hot. GX53 lamps are flat and shallow and therefore we can suggest our energy saving IP64 bathroom light. This needs a recessing depth (including the ceiling material) of only 70mm. Better still it'll give you a good deal of light in that shower. Consult with your electrician about the need for a 30mA RCD device for this light (some lower ceiling properties require them i.e. a ceiling under 2250mm from the shower tray.)

Does Ref: MIKMINT take 35 watt GU10s?
The version reference MIK5564 takes GU10 mains voltage lamps.

Can I wall mount this light fitting in my shower wet room, if I have sufficient void in the wall to accommodate?
Firstly this product is ideal for use in a wet room.
As for the void, regardless of whether fitted in wall or ceiling you will need a degree of free air to allow the light fitting to cool. Having insufficient ventilation will cook the light fitting and it's internal components and the cable providing the electrical supply. This will result in premature failure of bulb and fitting and can even cause a fire. Fittings with LED lamps generate less heat so can be used in smaller spaces.
We'd love to discuss your needs in more depth (excuse the pun) please call and speak to someone in our technical team and we'll find the ideal solution.

Email a friend.
Please fill out the details below and we will email your friend with a link to this page.
Your Name
Friends Name
Friends Email Address
Spam Protection - Please type 'racecar' backwards.

Code	Description	Price Exc VAT	Price Inc VAT	Qty
MIK5554	Round Glass Downlight 12v	£35.21	£42.25
KIT143	Round Glass Downlight 12v with transformer & lamp	£39.38	£47.25
MIK5598	Round Glass Downlight 12v (fire rated housing)	£37.86	£45.43
KIT144	Round Glass Downlight 12v (fire rated housing) with transformer and lamp	£42.03	£50.43
MIK5564	Round Glass Downlight 240v mains	£43.00	£51.60

FREE DELIVERY to most postcodes on orders over £50

Below This Figure Our Delivery Charge is fixed at £4.95

We have the following accessories you may be interested in


60va 12v Transformer Auto Reset Reduced in price RRP ~~£4.50~~
Our Price £3.30 inc VAT

First Name
Last Name
Email
Tel
Review Description
Your Rating
To verify you are human and not a spammer please spell “racecar” backwards.

Name
Email
Tel
Question
To verify you are human and not a spammer please spell “racecar” backwards.

Request a Project Price.
Your Name
Your Email
Your Tel
Project Name
Expected Delivery Date
Quantity Required
Additional Notes
To verify you are human and not a spammer please spell “racecar” backwards.