A smaller version of our best selling IP65 rated downlight for MR16 lamps. This version has a 74mm diameter bezel and is suited to the smaller MR11 lamps. The stirrup for mounting the lamp (as pictured) is supplied, however the lamp is not.
The fitting has an outer collar which is installed first with the outer bezel/fascia twist locking on to the collar.
- Discreet size
- 35W Maximum
- IP65 - jetproof
- Polished Chrome Finish
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
MR11 - 12v Halogen Reflector |
| Spare Lamps |
MR11 12v Halogen Dichroic Lamp
|
| Dimmable? |
On good quality leading edge or trailing edge dimmers  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
35w |
| Width/Diameter |
74mm |
| Height |
100mm |
| Cut-Out Diameter |
55mm |
| Construction |
Cast Aluminium |
| Wiring Details |
Class 3 - Supplied from an SELV Transformer |
| IP Rating |
IP65 |
Availability: Normally delivered in 3-5 days
.jpg "Click to enlarge")
.jpg)
