Polished chrome 3 light bar. The fitting then has 3 small thick rods which allows the lamps to be attached.
The lamp heads are adjustable, They have a small thin stick on the side which allows you to direct the light where ever you want it.
Part of a range - Single, triple and triple light bar available.
IP20 Rated - Giving protection against fingers or other objects no greater than 80mm in length and 12mm in diameter.
Suitable for bathroom zones 3.
Comes supplied with 3 x GU10 50w lamp.
- Polished chrome finish
- IP20 Rated
- Part of a range
- Suitable for bathroom zone 3
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
GU10 - Mains Halogen Reflector |
| Spare Lamps |
GU10 Mains Halogen lamps - 10 Pack
|
| Lamps Included |
Yes |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
50w |
| Total Wattage |
50w |
| Width/Diameter |
135mm |
| Construction |
Polished Chrome |
| IP Rating |
IP20 |
Availability: Normally delivered in 5-7 days