Exclusive to Lighting Styles this highly effective battery operated vanity mirror is a steal at £75.00.
The vanity mirror is supplied with 5x magnified glass making it perfect for that close-up work in the bathroom.
We've been asked for battery operated mirrors for some time so we undertook an exercise to design a high quality mirror that can be installed by anyone in any location. The results is a mirror that gives a significant amount of light but does not require new batteries every week.
Installation could not be simpler - 2 screws is all it takes, at the top and bottom of the pole. Insert the batteries (supplied) and push the on button. This is also used to control its 3 step dimmer. Pressed once the mirror will be fully illuminated, pressed a second time will reduce the brightness by a third, pressed a third time reduces it by a further third and then the fourth press turns off the mirror completely.
The single arm that is attached to the backing rod measures 165mm and can rotate left and right, also has the ability to slide up and down the rod which comes in handy in a household where heights differ.
When fully extended the mirror is 215mm from the wall but this folds back close to the wall when not required. - when flush against the wall the mirror projects 62mm.
The mirrored glass itself will rotate left and right and has 12 super bright LED's. Batteries are located at the back of the mirror face making it easy to change the batteries over.
This vanity mirror is designed to be affixed to a wall or other solid structures.
Does not require an electrician and simply runs off 3 AA alkaline batteries.
- Battery operated - NO electrician required and suitable for anywhere in the bathroom
- Adjustable height and tilt function - so will suit all users of all heights
- Rotates on the upright pole - neatly folds back against the wall when its not needed
- Auto off and three step dimmer - adjustable light and switches off after use
| Specification |
| Lamp Type |
Long Life LED light source |
| Lamps Included |
Yes |
| Dimmable? |
Three stage built-in touch dimming  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Width/Diameter |
210mm |
| Length |
500mm |
| Height |
210mm |
| Depth/Projection |
62mm |
| Adjustable Height |
Yes – while in situ |
| Construction |
Steel, Aluminium & Glass |
| Wiring Details |
Not applicable |
Availability: Normally delivered in 3-5 days