Ten Light Round LED Kit - Bathroom

A pack of 10 LED lights which provide a pleasant lighting effect ideal for providing some mood lighting to your bathroom.

Supplied as a kit containing 10 lights each with 5 metre of cable, an in-line power supply and junction box with 15 metres of cable. All connections are push-fit so no tools are required.

Smaller heads contains a single LED diode. Medium heads contains 3 LED diodes. Large heads contain 6 diodes

Requires a void of at least 30mm. Hole size 12mm (small), 22mm (medium) and 32mm (large)

Light output: large 60 lux at 0.5m, medium 30 lux at 0.5m, small 10 lux at 0.5m.

The power supply is in line so the 3 pin plug can be removed if wired into a fused spur.

• Kit contains 10 lights, in-line power supply, junction box and all cable
• Cool running - Safe to be touched
• IP67 Weather proof
• Also very effective when used as plinth lights

Specification
Number Of Lamps	10
Lamp Type	Long Life LED light source
Dimmable?	No
Construction	Polished Steel
Wiring Details	Class 3 - Supplied from an SELV Transformer
IP Rating	IP67

Availability: Normally delivered in 3-5 days

Are these dimmable? These LED fittings are not dimmable.

Can you just use 7 led lights instead of the 10 with the led driver/transformer? There is no issue with minimum loads on the power supply so any number of LED heads will work just fine.

Can these be used within a bathroom. I have some recessed shelving built into the walls around the bath & shower areas. I would like to use these as mini downlighters within the shelving recesses to act as feature lights. With a IP67 Rating they are more than suitable in the bathroom and can be used in zone 1,2 and 3.

I wish to mount the lights in to the floor along the side of the skirting not a walk area is this ok? Yes, they are fine for recessing into the floor.

I note that these can be used in Zone 1, could they be used in the wet room floor, directly below the shower? They have a IP rating of 67, so they a protected against immersion. Your issue is making the installation i.e. the hole in the floor watertight. We would suggest something in a higher price bracket.

My main query is do these units clamp into a hole or are they push fit? I'm a sparky and cabling and locating blind holes are not a problem? I just want confirmation these lights will stay put in a carpet instalation, not float on top of the carpet? These are a push fit and held in place by friction. Cut the hole too big or attempt to hold down too much carpet and underlay and they will pop up. You need to use something with screws or a threaded collar (or just don't install lights into a carpet)

if I intend to mount these in a wooden floor are they able to be clamped securely into the floor such that they compress the carpet down into a tidy round? Hmm this would be down to trial and error. If you cut a hole and then laid the carpet how would you find the hole and connect all the cables? I don't think we would suggest this as being an easy installation.