IP55 LED Strip - 1000mm Long

LED lighting is a great way of getting mood lighting in your bathroom and these sealed LED strips have 72 super flux LEDs in each 1.0 metre length.

We offer these in three colours: warm white, crisp white and blue. warm white looks good against warm wall or tile colours. Crisp white look superb on cooler room colours and tiles and blue just looks great in a white bathroom!

These circuit board mounted LEDs are mounted in an aluminium profile which is sealed with synthetic resin to IP55.

We supply these as an installer kit which includes the LED strip, a 5.0 metre feed-in cable and a 24 volt 6 watt power supply.

The plug and socket connection is between the DC power supply and the led lights - it's a push fit connection.

• 60 degree beam angle
• IP55 rating safe for use in zone 1: waterproof and safe
• Great lighting effect
• Simple plug and socket connection: no soldering

Specification
Number Of Lamps	72
Lamp Type	Long Life LED light source
Lamps Included	Yes
Max Wattage	6w
Width/Diameter	24mm
Height	15mm
Construction	Aluminium - Anodised
Wiring Details	Class 3 - Supplied from an SELV Transformer
IP Rating	IP55

Availability: Normally delivered in 5-7 days

If using these lights in the bathroom, surely they are illegal if you need to plug them in? Or at least it would be unsightly to have a cable running out the bathroom door to the nearest socket in the hall. Solution? Oh dear what we have written has been misinterpreted. The plug and socket connection is between the DC power supply and the led lights - it's a push fit connection. It doesn't have a trailing lead with a 3 pin plug on the end. The power supply is listed below the product. This should be located out of the way i.e. under a bath or in the roof space. The electrical (mains AC incoming) connection to the power supply should be hardwired i.e. carried out by your electrician and typically installed on the switched lighting circuit or via a fused spur. Between the DC power supply and the LED strip you will require a power lead (also listed below). This is hard wired to the secondary (DC) side of the power supply and connected to the LED strip with a push fit connection.

Can the lengths be cut? I need more than 1 m not less than 2m The lengths can not be cut, they have to be kept at the standard length.