A replacement transformer that may be compatible with many ceiling light fixtures.
Diameter: 110mm
Depth: 35mm
Hole diameter: 11mm
Aurora fully dimmable 50-210 watt Round electronic transformer.
Minimum load for dimming is 100 watts.
Line current 0.85 Amp.
Fully dimmable with resistive and inductive dimmers. Round electronic transformer for integration into luminaires or surface mounting. Suitable for use in floor/desk lamp bases or low voltage plate lights.
1.0kV SURGE PROTECTION – EN 61547.
Safety compliance – EN 61347 EMC compliance – EN 55015, EN 61000, EN 61547.
- Ideal replacement for many ceiling fixtures
- Dimmable on resistive and inductive dimmers
- Minimum load 100 watts
- maximum load 210 watts
| Specification |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Total Wattage |
210w |
| Construction |
Plastic - ABS |
| Wiring Details |
Class 2 - Double Insulated - Requires no Earth Connection |
Availability: Normally delivered in 3-5 days
.jpg "Click to enlarge")
.jpg)
