MR16 Philips Perfect Fit LEDspot 12v Lamp

Excellent alternative to 20w halogen MR16 (12v) lamps with extremely long life and unrivalled light quality.

Great for high to reach areas where maintenance cost can be high.

Great replacement for lamp used for long hours every day

Simple retrofit, plugs into most standard 12v downlights, spotlights and track lights.

High output intense light comes from the 3 x 1.3w Philips LEDs in this lamp. The lamp beam angle is 25º and comes in two colour temperature: 2700ºk (warm white), 3000ºk (white).

No heat (infra-red) and no UV (ultraviolet) in the light beam, and very little heat at the lamp.

Unlike fluorescent lamps there's no mercury making it easier to lower your carbon footprint with a limited life cycle impact.

Same lamp cap as a MR16 lamp. Same size as a standard MR16 lamp.

Can be retrofitted onto standard 12v MR16 installations using existing power supply HOWEVER you should check the minimum load on the existing transformer (typically 20w on a 60va transformer) and share transformers between lamps to meet the required minimum loads. This lamp is also dimmable if your installation meets the minimum load

• Low energy consumption and excellent alternative to 20w halogen MR16
• Long, long lamp life of 40,000 hours
• Bright intense beam - unlike budget LEDs
• Genuine alternative to halogen

Specification
Dimmable?	Yes on standard dimmer Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating.
Width/Diameter	50mm
Height	40mm
Wiring Details	Class 3 - Supplied from an SELV Transformer

Availability: Normally delivered in 5-7 days