AR111 Lamps from FN Light (German)

So what's so great about the AR111 lamp that will make you want to put a larger fitting in your ceiling?

Simply put the AR111 reflector lamp is a performance reflector lamp.

It gives precise lighting and reduces glare. It is still used widely in retail applications particularly when good colour rendering is paramount.

So by using this type of light in your project you'll get high contrast, low glare lighting for picking out your features.

Also called Halospot 111 (osram), Masterline 111 (Philips).

Suitable for a wide range of applications in display, accent lighting and general lighting in retail, museum and everywhere quality of light is essential.

Bright, white halogen quality light (up to 2950K) for decorative and architectural lighting Aluminium faceted reflector for a better beam control Metal cap over filament to avoid direct glare effects and hot point UV-block to reduce bleaching effect Long life (2 000 hours)

Select Beam angles and wattages required below

• Precise lighting
• Reduced glare
• Many wattages and beam angles
• 2000 hour average life

Specification
Dimmable?	Yes on standard dimmer Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology). These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating.
Width/Diameter	111mm
Height	57mm

Availability: Normally delivered in 5-7 days